EMScope SOFTWARE
The following software and documentation is available for download
Click the link above to download a LabView based front end to the NIMS MT instrument that can be used to setup and monitor the instrument in the field, and to receive and log telemetry from suitably equipped NIMS.
This ZIP archive contains the beta release of the WindowsXP version of the LabView based front end, as well as the National Instruments(c) run time libraries that make it possible to run the Virtual Instrument on computers that do not have their own LabView licenses installed. The version provided in this ZIP file does not require a LabView license to run. This has been tested on a Toshiba laptop with both DB9/serial port and with a Cables-to-go USB->Serial converter cable; and on an Acer ONE Aspire Netbook also with a Cables-to-go converter cable.
The machine on which this interface is installed will either require an old-style DB9/RS232 serial interface, or a USB-to-serial converter cable, with drivers installed prior to installation of the interface contained within this zip file.
In the near future a Mac OS X distribution of the front end will also be available on this site. A Linux distribution is being considered for future release, if there is sufficient demand from the user community.
Click the link above to download the 2008 version of the EMScope MT site preparation and NIMS field installation manual in PDF format. This version is appropriate to operations using the original HP200/DOS based user interface and NOT the new LabView interface found in the top link on this page. A new user’s manual is in preparation and will be available shortly from this site. Please check back frequently.
NIMSmanual_EMSCOPE_080529.2.pdf
Click the link above to download the 2008 version of the single station data processing manual for field processing of NIMS data using the OSU MATLAB NIMS data QC interface.
